Dental Milling Blog - Tips, Guides & Industry Insights
Why Your Ceramill Motion 2 Chips Zirconia (And How to Fix It)
11 Mar, 2026
0 Comment
One in Three Crowns Chipping Off the Machine
A Ceramill Motion 2 user recently reported that roughly one in three zirconia crowns came off the mach...
Imes-Icore 250i Compatible Milling Burs: Setup & Selection Guide
10 Mar, 2026
0 Comment
The Imes-Icore 250i: A Capable Machine with Expensive Habits
The Imes-Icore 250i is a serious 5-axis wet mill. German engineering, tight tolerances...
VHF K4 Milling Burs: Jensen vs Sierra Lifespan Comparison
10 Mar, 2026
0 Comment
The VHF K4 Bur Problem Nobody Talks About
VHF K4 owners know the drill: you buy a set of burs, run zirconia for a week, and half of them are done. ...
Roland DWX-42W Rough Milling Bur Troubleshooting: ATC Maintenance Guide
09 Mar, 2026
0 Comment
The Roland DWX-42W is a reliable wet mill. It handles glass ceramics, zirconia, and composites with the kind of precision that keeps small-to-medium l...
Roland DWX Milling Bur Lifespan: Real-World Data from Lab Owners
09 Mar, 2026
0 Comment
Every dental lab owner has the same question about milling burs: how long do they actually last? Manufacturers print numbers on spec sheets — 500 unit...
Why Do Milling Burs Break in PMMA? Roland DWX Troubleshooting Guide
09 Mar, 2026
0 Comment
PMMA should be easy. It's soft, it mills dry, it doesn't fight the bur the way zirconia does. So when a lab owner running a Roland DWX-52D posts on De...
Zirkonzahn M4/M5 Compatible Burs: The Real Cost of OEM Lock-in
05 Mar, 2026
0 Comment
If you run a Zirkonzahn M4 or M5, you already know the feeling. The machine itself is solid — arguably one of the best wet milling platforms for metal...
Pre-Sintered vs Fully Sintered Zirconia: Bur Selection Guide
05 Mar, 2026
0 Comment
What's Actually Different: Pre-Sintered vs Fully Sintered Zirconia
Most dental labs mill pre-sintered zirconia. You rough it, finish it, then sinte...
UP3D P53 Milling Burs Compatibility Guide
05 Mar, 2026
0 Comment
If you just picked up an UP3D P53 milling machine — or you're considering one — the first question that matters is which milling burs actually fit. Th...
Showing 1 to 10 of 53 (6 Pages)
Sirona MCX5 and MCXL Compatible Milling Burs: Setup, Selection, and Lifespan