Zirkonzahn M1 Wet Compatible Dental Milling Burs

Zirkonzahn M1 Wet Compatible Dental Milling Burs

Aftermarket dental milling burs cut to match OEM geometry for the Zirkonzahn M1 Wet. These burs process zirconia, PMMA, wax and metal on heavy-metal models on the Zirkonzahn M1 Wet under its native wet and dry variants per model workflow, with 3 mm shank typical so the tool changer accepts them without modification.

Typical tool set

• Rough-shaping burs (2.5 mm / 2.0 mm tip) for bulk material removal
• Medium burs (1.0 mm tip) for axial walls and proximal surfaces
• Fine burs (0.6 mm / 0.3 mm tip) for occlusal anatomy and margins
• Matched shank diameter for direct mount on the Zirkonzahn M1 Wet

Expected bur life

Bur life depends on material hardness, feed and speed, and whether the job is a single crown or a full-arch framework. As a rough guide, a dental zirconia set typically produces 30-60 crowns before finishing quality drops; PMMA and wax burs last considerably longer, metal and glass ceramic considerably shorter. Track your milling logs and replace per actual wear, not on a fixed interval.

Ordering notes

Each product page lists tip diameter, shank diameter, overall length, coating and typical use. Confirm the shank matches your Zirkonzahn M1 Wet tool changer before ordering - if you are not sure, pull a used OEM bur from the machine and measure with a caliper. We ship internationally and package burs to protect the cutting edges in transit.

Compatibility

CADBURS manufactures aftermarket dental milling burs for the Zirkonzahn M1 Wet. We are not affiliated with Zirkonzahn Srl; Zirkonzahn Srl is a trademark of its respective owner and is referenced here solely to describe machine compatibility.