Amann Girrbach Ceramill Motion 3 Compatible Dental Milling Burs

Amann Girrbach Ceramill Motion 3 Compatible Dental Milling Burs

Burs here are dimensional drop-in replacements for the OEM tool set shipped with the Amann Girrbach Ceramill Motion 3. They run the Amann Girrbach Ceramill Motion 3's standard wet and dry per model programme on zirconia, PMMA, wax and metal on Motion 3 and mount with the 3 mm shank typical on Ceramill.

Typical tool set

• Rough-shaping burs (2.5 mm / 2.0 mm tip) for bulk material removal
• Medium burs (1.0 mm tip) for axial walls and proximal surfaces
• Fine burs (0.6 mm / 0.3 mm tip) for occlusal anatomy and margins
• Matched shank diameter for direct mount on the Amann Girrbach Ceramill Motion 3

Expected bur life

Bur life depends on material hardness, feed and speed, and whether the job is a single crown or a full-arch framework. As a rough guide, a dental zirconia set typically produces 30-60 crowns before finishing quality drops; PMMA and wax burs last considerably longer, metal and glass ceramic considerably shorter. Track your milling logs and replace per actual wear, not on a fixed interval.

Ordering notes

Each product page lists tip diameter, shank diameter, overall length, coating and typical use. Confirm the shank matches your Amann Girrbach Ceramill Motion 3 tool changer before ordering - if you are not sure, pull a used OEM bur from the machine and measure with a caliper. We ship internationally and package burs to protect the cutting edges in transit.

Compatibility

CADBURS manufactures aftermarket dental milling burs for the Amann Girrbach Ceramill Motion 3. We are not affiliated with Amann Girrbach AG; Amann Girrbach AG is a trademark of its respective owner and is referenced here solely to describe machine compatibility.