Dentium-D3 Compatible Milling Burs
Dentium Compatible Zirconia Milling Burs Shank 3mm Φ2.0mm
Product Specifications: Cutting Diameter: 2.0mm, Effective Length: 16mm, Overall Length: 50mm, Shank Diameter: 3mm | Engineered for fine-detail dental CAD/CAM milling with excellen..
Dentium Compatible Zirconia Milling Burs Shank 3mm Φ1.0mm
Product Specifications: Cutting Diameter: 1.0mm, Effective Length: 16mm, Overall Length: 50mm, Shank Diameter: 3mm | Engineered for fine-detail dental CAD/CAM milling with excellen..
Dentium Compatible Zirconia Milling Burs Shank 3mm Φ0.6mm
Product Specifications: Cutting Diameter: 0.6mm, Effective Length: 10mm, Overall Length: 50mm, Shank Diameter: 3mm | Engineered for fine-detail dental CAD/CAM milling with excellen..
CAD/CAM Dental Wax Disc 98mm for Open Milling Systems - Residue-Free
CAD/CAM Dental Wax Disc 98mm for Open Milling SystemsThe CAD/CAM Dental Wax Disc for 98mm open milling systems is a precision-engineered wax blank designed for digital wax pattern ..
Removable Denture PMMA Resin Disc 98mm for Open CAD/CAM Milling Systems
Removable Denture PMMA Resin Disc 98mm for Open CAD/CAM SystemsThe Removable Denture PMMA Resin Disc for 98mm open milling systems is purpose-built for digital denture fabrication ..
Flexible PMMA Resin Disc 98mm for Open Milling Systems - Impact Resistant
Flexible PMMA Resin Disc 98mm for Open CAD/CAM Milling SystemsThe Flexible PMMA Resin Disc for 98mm open milling systems is specially engineered for dental laboratories that requir..
Multilayer PMMA Resin Disc 98mm for Open Milling Systems - Natural Gradient
Multilayer PMMA Resin Disc 98mm for Open CAD/CAM Milling SystemsThe Multilayer PMMA Resin Disc for 98mm open milling systems brings a natural, tooth-like layering effect to provisi..
Monolayer PMMA Resin Disc 98mm for Open Milling Systems - 22 Shades
Monolayer PMMA Resin Disc for 98mm Open CAD/CAM Milling SystemsThe Monolayer PMMA Resin Disc for 98mm open milling systems is a premium dental milling material designed for fabrica..
Transparent CAD/CAM PMMA Disc 98mm for Open Milling System
Transparent CAD/CAM PMMA Disc for 98mm Open Milling Systems The Transparent CAD/CAM PMMA Disc is a high-translucency milling material developed for the fabrication of long-term pr..
Dentium-D3 Compatible Dental Milling Burs
Aftermarket dental milling burs cut to match OEM geometry for the Dentium-D3. These burs process zirconia, PMMA and wax on the Dentium-D3 under its native dry milling workflow, with 4 mm shank so the tool changer accepts them without modification.
What's in the tool family
- Heavy roughing burs for block reduction
- Intermediate burs for contour milling
- Fine finishing burs for margin integrity and occlusal detail
- All cut to the Dentium-D3 tool-changer shank tolerance
When to replace
Replace burs when you start seeing fuzzy margins, white-line chipping at incisal edges, or an increase in milling time at unchanged feed and speed. All three are signs of cutting-edge wear rather than machine fault. A good habit is to photograph a fresh bur's tip under magnification and compare monthly - wear is obvious at 20x.
Before you order
Check three things on the OEM bur you are replacing: shank diameter, overall length, and tip diameter. These three specs together identify the correct aftermarket bur 95% of the time. If the spec sheet on a product page does not list what you need, contact us with the OEM part number before ordering.
Compatibility
CADBURS manufactures aftermarket dental milling burs for the Dentium-D3. We are not affiliated with Dentium; Dentium is a trademark of its respective owner and is referenced here solely to describe machine compatibility.
Need ordering or compatibility help?
We can help with machine matching, shipping questions, returns, and bulk orders before you place your order.
Contact support | Shipping policy | Return policy | Help center