JINY JDM5 MAX / JDM5T Pro / F5T Pro Compatible Dental Milling Burs

JINY JDM5 MAX / JDM5T Pro / F5T Pro Compatible Dental Milling Burs

Aftermarket dental milling burs cut to match OEM geometry for the JINY JDM5 MAX / JDM5T Pro / F5T Pro. These burs process zirconia, PMMA and wax on the JINY JDM5 MAX / JDM5T Pro / F5T Pro under its native dry milling; wet on JDM5DW workflow, with 3 mm or 4 mm depending on model so the tool changer accepts them without modification.

Bur selection on the JINY JDM5 MAX / JDM5T Pro / F5T Pro

• Roughing pass: larger tip diameter for fast material removal on zirconia, PMMA and wax
• Semi-finish pass: medium diameter for axial walls
• Finish pass: small diameter for detail and margin
• Shank: 3 mm or 4 mm depending on model for direct OEM replacement

Tool life notes

Keep a simple log (job count per bur, material, any margin issues) and the pattern becomes obvious within a week or two. Most early tool failures are feed/speed or coolant issues, not bur quality - sudden chipping usually means the collet is loose or the spindle TIR has drifted, not that the bur is defective.

Support

If the first bur you order does not drop straight into the JINY JDM5 MAX / JDM5T Pro / F5T Pro tool changer, contact us with a photo of the OEM bur alongside ours and we will confirm whether it is a shank-mismatch issue or something else. We would rather get the spec right before a second order than have you run a partial batch with the wrong tool.

Compatibility

CADBURS manufactures aftermarket dental milling burs for the JINY JDM5 MAX / JDM5T Pro / F5T Pro. We are not affiliated with JINY; JINY is a trademark of its respective owner and is referenced here solely to describe machine compatibility.