Aidite AMW-400S Pro Compatible Dental Milling Burs

Aidite AMW-400S Pro Compatible Compatible Dental Milling Burs

Milling burs for the Aidite AMW-400S Pro Compatible, cut to the same tip geometry and shank tolerance as the OEM tool set. Used for zirconia, PMMA, wax, glass ceramic and metal on selected models in the machine's standard wet and dry workflows cycle. Mounting: 3 mm, 4 mm or 6 mm depending on model.

Typical tool set

• Rough-shaping burs (2.5 mm / 2.0 mm tip) for bulk material removal
• Medium burs (1.0 mm tip) for axial walls and proximal surfaces
• Fine burs (0.6 mm / 0.3 mm tip) for occlusal anatomy and margins
• Matched shank diameter for direct mount on the Aidite AMW-400S Pro Compatible

Expected bur life

Bur life depends on material hardness, feed and speed, and whether the job is a single crown or a full-arch framework. As a rough guide, a dental zirconia set typically produces 30-60 crowns before finishing quality drops; PMMA and wax burs last considerably longer, metal and glass ceramic considerably shorter. Track your milling logs and replace per actual wear, not on a fixed interval.

Ordering notes

Each product page lists tip diameter, shank diameter, overall length, coating and typical use. Confirm the shank matches your Aidite AMW-400S Pro Compatible tool changer before ordering - if you are not sure, pull a used OEM bur from the machine and measure with a caliper. We ship internationally and package burs to protect the cutting edges in transit.

Compatibility

CADBURS manufactures aftermarket dental milling burs for the Aidite AMW-400S Pro Compatible. We are not affiliated with Aidite; Aidite is a trademark of its respective owner and is referenced here solely to describe machine compatibility.